2 Pcs 20N-150N Hydraulic Gas Strut Lift Support Cabinet Hinge Kitchen Cupboard Door Gas Spring Door Shocks Cabinets Hinges
Application
The Hydraulic support is suitable for automatic expansion and is applicable to various items such as Electric meter box, decoration picture, Cupboard door, Furniture door, Mechanical door, Upturned door, Tatami, Tip-up door, drop down door, Fire box, Dustbin, etc.
Features
- Convenient to open and close cabinet doors.
- Quiet, soft, convenient, and safe.
- The maximum angle is 100 degrees.
- Great for supporting the lid to keep it open.
Package Included
The package contains 2 Pcs hydraulic gas struts lift support with mounting hardware.
Perfect Service
We are committed to providing perfect service to our customers. If you have any questions, our team will patiently answer them. If you are not satisfied with our item, please contact us, and we will help you solve the problem better. Don’t hesitate, just buy it.
Description
QPQ Nitriding Treatment
The support hinge has undergone QPQ nitriding treatment. It has a small surface friction, good finish, no blunt points, and no jamming during stretching.
Precision Thickened Cylinder
The precision thickened cylinder has high load-bearing capacity, is not easy to deform, and has passed 60,000 anti-fatigue tests.
High-Quality Sealing Ring
The product has a multi-channel protection system with double sealing rings, which provides strong sealing and is not easy to leak.
Cliff B –
These are great cabinet door support. Two easily hold in place my big heavy glass cabinet doors!
David George –
Works as described. Holds up the heavy doors without issue. Good value
LONNIE RIGGENS –
this was easy to install. works very well, smoith and seemaless lift
Pure –
Used in camper. Probably could have went with a smaller version.
Troy –
Doors on my kitchen cabinet are bit heavy, those lifts do the job of holding them very well. Happy with purchase. All four lifts work well.
Beloved –
Perfect for our RV which didn¡®t have these installed! Made such a difference! Very easy to install! Holds well
Quinby –
These are an absolute must for an rv/ camper! Easily 100x better than what an rv comes with!The first one took a little trial and error but one you get the right measurements just continue on to the next using that setup
Shining –
I purchased two packs of the 7″ struts and installed 6 in just over an hour. As another review mentioned, my cabinets don’t have a solid side wall so I only used two screws in the cabinet frame to secure the lower ball.Since I had to modify the installation, the instruction dimensions were useless (and also incorrect even if I could have used them, ref. 80 or 105mm for lower ball, which should be more like 8.0 or 10.5) so I had to measure and come up with my own. The strut length is 174mm ball-center to ball-center. For the top bracket I used 45mm for cabinet measurement from the top, 30mm from the side (depends on door width vs. opening width). After attaching the strut to the top bracket, for a 90 degree (horizontal door) opening, it was roughly 125mm from the top of the opening to the center of the lower ball. The space between the facing edge of the cabinet opening and the edge of the lower bracket was 0mm since it had to be mounted to the cabinet frame.
Anita –
We have a cabinet that lifted up but did not have a strut so you had to hold it up while trying to get stuff out of it. The solved it, super easy to install.
Odette –
I bought a set of these from another supplier (look exactly like these except for the printing on the side, the instructions are even the same). Anyway, one of the previous set failed after a week or so, so I needed a replacement. The other three, and the one I used out of this set are working fine so I’m happy given that the price.